Iogear GWHD11 Manual Page 1

Quick Start GuideGWHD11PART NO. Q1292www.iogear.comWireless HDMI Transmitter andReceiver Kit

9Remove Transmitter:→ GWHD11→ GWHDSTX  Return1. Press Transmitter No. to display the list of linked transmitters.3. Select Remove Transmitter opti

CE Compliance This device has been tested and found to comply with the following European Union directives: Electromagnetic Capability (89/336/EMC), L

[email protected] Da Vinci, Foothill Ranch, CA 92610ContactLimited Warranty WE’RE HERE TO HELP YOU! NEED ASSIST

1Package ContentsSystem RequirementsOverview1 x Wireless HDMI Transmitter 1 x Wireless HDMI Receiver 1 x Mini USB to USB Cable 2 x USB Power Adapter 1

28Wireless HDMI Receiver: 1. Power Button with LED Indicator: - Lights green when powered on - Lights red when in Standby Mode 2. Source Button 3.

3Hardware InstallationStep 1: Setup the Wireless HDMI Transmitter1. Connect the Wireless HDMI Transmitter to the HDMI port of the computer or medi

4Step 1: Setup the Wireless HDMI Transmitter1. Connect the Wireless HDMI Transmitter to the HDMI port of the computer or media source. 2. Power th

5SEARCHING...Pairing Mode for the Receiver:1. Once the receiver is connected to the HDTV or HD projector and is powered on, press the Tran

6The Power LED on the receiver will flash ORANGE when it is in Pairing Mode.To exit Searching Mode, press the Transmitter No. button on the remote con

7Select Transmitter Number:→ GWHD11→ GWHDSTX SETUP 5. After the pairing is complete, both the transmitter and receiver will re-boot and establish

8Select Transmitter Number:→ GWHD11→ GWHDSTX SETUPEdit Transmitter name:→ GWHD11→ GWHDSTX  Return3. Select Modify Transmitter Name option to change