Iogear GWU647 Installation Guide

InstallationInstallation GuideUniversal 5-Port Wi-Fi N Ethernet HubGWU647PART NO. M1200

10Installation without WPS - Windows XPStep 1: Turn off your computer’s wireless connection (if applicable) and disconnect the Ethernet cable current

11b. Next, right click on “Local Area Connection” and select “Properties”.

12c. Select “Internet Protocol (TCP/IP)” then select “Properties”.D. Select “Use the following IP address” and enter 192.168.1.3 in the IP address sec

13Step 4: Open your web browser and enter 192.168.1.252.Thiswillbringupthecongurationutility. Click “Site Survey” to scan for your wireless ne

14Step 5: Select the AP you want to connect to and enter the password if the network is secured. Click the “Connect” button to establish the connectio

15Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server

16Installation without WPS - Windows VistaStep 1: Turn off your computer’s wireless connection (if applicable) and disconnect the Ethernet cable cur-r

17b. Under Network and Internet, click “View network status and tasks”.

18c. Under Tasks in the left pane, click “Manage network connections”.d. Next, right click on “Local Area Connection” and click “Properties”.

19e. Next, select “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties”

20f. Select “Use the following IP address” and enter 192.168.1.3 in the IP address section. Next enter 255.255.255.0 in the Subnet Mask. Click OK.

21Step 4: Open your web browser and enter 192.168.1.252.Thiswillbringupthecongurationutility.Click“Site Survey” to scan for your wireless ne

22Step 5: Select the AP you want to connect to and enter the password if the network is secured. Click the “Connect” button to establish the connectio

23Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server

24Installation without WPS - Windows 7Step 1: Turn off your computer’s wireless connection (if applicable) and disconnect the Ethernet cable cur-rentl

25b. Under Network and Internet, click “View network status and tasks”.

26c. Under Tasks in the left pane, click “Change Adapter Settings”.d. Next, right click on “Local Area Connection” and click “Properties”.

27e. Next, select “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties”

28f. Select “Use the following IP address” and enter 192.168.1.3 in the IP address section. Next enter 255.255.255.0 in the Subnet Mask. Click OK.

29Step 4: Open your web browser and enter 192.168.1.252.Thiswillbringupthecongurationutility. Click “Site Survey” to scan for your wireless ne

3Table of ContentsPackage Contents 4System Requirements 5Product Overview 6Installation 8Installation without WPS - Windows XP 10Installation wi

30Step 5: Select the AP you want to connect and enter the password if the network is secured. Click “Con-nect” button to establish the connection. If

31Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server

32Installation without WPS - MacStep 1: Turn off your computer’s wireless con-nection (if applicable) and disconnect the Ethernet cable currently conn

33b. Select your Ethernet connection in the left pane. NextchangeconguretoManualandenterIP address 192.168.1.100 and Subnet Mask 255.255.255.0

34Step 4: Open your web browser and enter 192.168.1.252.Thiswillbringupthecongurationutility. Click “Site Survey” to scan for your wireless ne

35Step 5: Select the AP you want to connect to and enter the password if the network is secured. Click the “Connect” button to establish the connectio

36Step 6: Close your browser and change the network settings on your computer back to DHCP. Refer to steps 3a through 3b.Step 7: Disconnect the Ethern

37Manual Set UpIf your network security settings are set to not broadcast your SSID, then you will need to manually set up the SSID and the wireless s

38Step 2: Click “Next” Step 3: Enter your networks SSID and click “Next”

39Step 4: Enter your encryption information and click “Finished”Step 5: The Universal Wi-Fi Hub will now reboot.

4Package Contents• 1 X Universal 5-Port Wi-Fi N Ethernet Hub • 1 X AC to USB Power Cable • 1 X AC to USB Power Adapter • 1 X Ethernet Cable • 1 X

40Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server

41Firmware UpgradeNote:Ifarmwareupdateisavailable,itwillbeposted on iogear.com. Please check http://www.iogear.com/support/dm/Step 1: Turn

42Step 5: Click “Browse”andlocatedyourrmwarele,selectit,andclick“Open”.

43Step 6: Click “Upload”tostartthermwareupgradeprocess.

44Firmware update complete. Wait for the device to reboot before disconnecting.

45Oncethedeviceisnishedrebooting,youwillseeastatusscreen.Checkyoursettings.Afterarmwareupgrade,theUniversalWiHubmayresetba

46Federal Communications Commission (FCC) StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pu

47This device has been tested and found to comply with the following European Union directives: Electro-magnetic Capability (89/336/EMC), Low Voltage

48The following contains information that relates to China.SJ/T 11364-2006部件名称有毒有害物质或元素铅 (Pb) 汞 (Hg) 镉（Cd） 六价 (Cr(VI))多溴联苯（PBB）多溴二苯醚（PBDE）电器部件 ● ○ ○ ○

49IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PR

5System Requirements• Operating System - Windows XP, Windows Vista, Windows 7 - Mac OS X v10.4 and above • Wireless network with WPS setup • Wire

50IOGEAR19641 Da VinciFoothill Ranch, CA 92610P 949.453.8782F 949.453.8785Visit us at: www.iogear.com Contact© 2011 IOGEAR® Part No. M1200IOGEAR, the

51

© 2011 IOGEAR®FUNIOGEAR offers connectivity solutions that are innovative, fun, and stylish, helping people enjoy daily life using our high technology

WPSReset PWR51 2 3 46Product Overview2 3141. WPS ButtonPush and hold the WPS button for 5~10 seconds to enable the WPS feature. 2. Ethernet PortThe

7LED Indicator State Description12 3 41. LAN LEDFlashing - Data is transmitting or receiving on the LAN interface. On - Port linked.Off – No link.2.

8Installation Wireless Setup with WPSStep 1: Power on your Universal WiFi Hub using either of these methods:•ConnecttheACAdaptercabletoadevice

WPSReset PWR51 2 3 49Step 1Step 3Step 2