Iogear GCS104U User Manual download pdf (Page 12)

Installation

Before you begin, make sure that power to your com-

puters and peripherals (monitor, scanner, etc.) is

turned off.

1.) Connect your monitor to the Console Video Port on the

MiniView

: USB.

2.) Connect your USB peripherals to the USB Downstream

Ports on the MiniView

: USB. Make sure you have a USB

keyboard and mouse at the very least.

3.) If you choose to use an external 5V power adapter, plug

the adapter into an AC source, then plug the adapter cable

into the Power Jack on the MiniView

: USB.

4.) Use the video extender cables to connect the

MiniView

: USB’s video ports to the video ports on the

corresponding computers.

5.) Use the USB A-B cables to connect the Upstream Ports

on the MiniView

: USB to available Downstream USB

ports on your computers.

Note: The MiniView

: USB defaults to Port 1 when

powered-on. If the computer attached to Port 1 is

inactive, the monitor will be blank so it may appear as if the

unit is not functioning. This is not the case. Simply press

the Port Selection Switch (located on the front panel), to

switch to an active computer on one of the other ports.

InstallationInstallation

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

No comments

Iogear GCS104U User Manual Page 12