Bluetooth™ GPS with Navigation SoftwareHardware Quick Start Guide (GBGPS201)
Operation7HARDWAREStep 1: Charging BatteryBefore you can use the GPS receiver, you need to fully chargethe internal battery. Plug one of the included
Operation8Once you establish connection with your Bluetoothdevice, the blue LED will remain solid blue.Note: If you encounter any connectivity problem
Operation9Make sure Bluetooth is ON.Tap on the Bluetooth icon to access the Bluetoothservices on your PDA.Tap on “Bluetooth Manager” to open it.Tap on
Operation10Make sure “Explore a Bluetooth device” ishighlighted and then tap “Next”5.Tap the box where it says “No Device selected”6.
11OperationTap the icon “IOGEAR GPS” When prompted fora PIN code, enter “0000” (four zeroes).Under the Service Election Tap “SPP for GPS”and then cli
Operation12Tap “Finish”9.Tap and hold until sub menu appears, then selectConnect10.
13OperationClose Bluetooth ManagerYou may now proceed to the “GPS SoftwareQuick Start Guide” to complete the GPSconnection setup.Note: In some cases,
14OperationDouble-click on the “My Bluetooth Places” icon toopen the Bluetooth software. And then do a“Search for devices in range” to discover theBl
15OperationWhen prompted to enter PIN code, please enter “0000” (four zeroes), and then click OK.When prompted to enter PIN code, please enter “0000”
16Operation6. Double-click on the GPS icon to see a list of theservices offered by this device. The serviceoffered by the unit is the Serial Port ser
©2004 IOGEAR. All Rights Reserved. PKG-M0129IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks of IOGEAR, Inc. Microsof
17OperationYou may now proceed to the “GPS Software QuickStart Guide” to complete the GPS connection setup.Note: In some cases, the Bluetooth connecti
23 Hubble • Irvine, CA 92618 • (P) 949.453.8782 • (F) 949.453.8785 • www.iogear.comContact info.
The IOGEAR Bluetooth GPS system is a real-time navigation system. The Bluetooth GPSreceiver allows you to receive positioning data from satellites and
Features Bluetooth enabled GPS system to take advantage of your Bluetooth enabled PDA or computer* Map and navigation software included Highly sensiti
Package ContentsThis package contains:• 1 Bluetooth GPS receiver• 1 AC-DC Charger• 1 Car Charger• 1 Pouch• 1 Neck Strap• 1 Quick Start Guide for Hardw
Introduction31.2.3.4.5.6.7.
Introduction41. Power SwitchTo turn the IOGEAR GPS unit ON/OFF, slide the switchtowards the desired position as indicated below.ON – Slide switch to
Introduction54. GPS Status LED (Green)• Blinking - GPS receiver is attempting to establish position.• Steady light - indicates the GPS position is es
Requirements6SafetyCarefully read all instructions before using the IOGEARGPS unit and set-up all your equipment in the car beforedriving. DO NOT att
Comments to this Manuals